User Performance-Monitor Counter Registers (Upmc1-Upmc4); Table 11-5. Pmc4 Events-Mmcr1[5:9] Select Encodings - IBM PowerPC 750GX User Manual

User's Manual
IBM PowerPC 750GX and 750GL RISC Microprocessor
Table 11-4. PMC3 Events—MMCR1[0:4] Select Encodings
Encoding
1 0000 Number of branches in the second speculative stream that resolve correctly.
1 0001 Number of cycles the BPU stalls due to LR or CR unresolved dependencies.
All others Reserved. Might be used in a later revision.
Bits MMCR1[5:9] specify events associated with PMC4, as shown in Table 11-5.
Table 11-5. PMC4 Events—MMCR1[5:9] Select Encodings
Encoding
00000 Register holds current value
00001 Number of processor cycles
00010 Number of completed instructions, not including folded branches
Number of transitions from 0 to 1 of specified bits in the Time Base Lower (TBL) register. Bits are specified through
00011
RTCSELECT, MMCR0[7–8]. 00 = 31, 01 = 23, 10 = 19, 11 = 15
00100 Number of instructions dispatched. 0, 1, or 2 per cycle
00101 Number of L2 castouts
00110 Number of cycles spent performing table searches for DTLB accesses.
00111 Reserved. Might be used in a later revision.
01000 Number of mispredicted branches. Reserved for future use.
01001 Reserved. Might be used in a later revision.
01010 Number of store conditional instructions completed with reservation intact
01011 Number of completed sync instructions
01100 Number of snoop request retries
01101 Number of completed integer operations
Number of cycles the branch processing unit (BPU) cannot process new branches due to having two unresolved
01110
branches
All others Reserved. Might be used in a later revision.
The PMC registers can be accessed with the mtspr and mfspr instructions using the following SPR
numbers:
• PMC1 is SPR 953.
• PMC2 is SPR 954.
• PMC3 is SPR 957.
• PMC4 is SPR 958.
11.2.1.6 User Performance-Monitor Counter Registers (UPMC1–UPMC4)
The contents of the PMC1–PMC4 are reflected to UPMC1–UPMC4, which can be read by user-level soft-
ware. The UPMC registers can be read with the mfspr instructions using the following SPR numbers:
• UPMC1 is SPR 937.
• UPMC2 is SPR 938.
• UPMC3 is SPR 941.
• UPMC4 is SPR 942.
Performance Monitor and System Related Features
Page 354 of 377
(Page 2 of 2)
Description
Comments
gx_11.fm.(1.2)
March 27, 2006