Load Optimal Settings; Load Best Performance Settings; Features Setup Page - IBM M789 Series Manual

Load Optimal Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the Setup Utility loads a set of fail-safe
default values. These default values are not very demanding and
they should allow your system to function with most kinds of
hardware and memory chips.
Note: It is highly recommend that users enter this option to load
optimal values for accessing the best performance.

Load Best Performance Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the Setup Utility loads a set of best-
performance default values. These default values are quite
demanding and your system might not function properly if you are
using slower memory chips or other low-performance components.

Features Setup Page

This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial PortA
OnBoard IR Port
OnBoard Parallel Port
Parallel Port Mode
Parallel Port IRQ
Parallel Port DMA
OnBoard IDE
Onboard LAN
Audio Device
Modem Device
USB Controller
USB Function for DOS
ThumbDrive Support For DOS Disabled
OnBoard FDC
This item enables or disables the onboard
floppy disk drive interface.
OnBoard Serial
These items enable or disable the onboard
PortA
COM1 serial port, and assign a port address.
Auto
3F8h/COM1
Disabled
378h
ECP
7
3
Both
ESC : Quit
Enabled
Item
Enabled
F1 : Help
Auto
Enabled
F5 : Old Values (Shift)F2 : Color
Disabled
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
27
↑↓←→ : Select
PU/PD/+/- : Modify