C-Bsr (Ipv6 Pim View) - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
Parameters
acl6-number: Specifies an IPv6 basic ACL by its number, in the range of 2000 to 2999.
Usage guidelines
In an ACL, the source field specifies the source IPv6 address range for the legal BSR. If you specify a VPN
instance in the ACL, the ACL does not take effect. The other optional parameters except the fragment
keyword and the time-range keyword are ignored.
Examples
# Configure the legal BSR address range to 2001::2/64, so that only the devices on the subnet
2001::2/64 can act as the BSR.
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] rule permit source 2001::2 64
[Sysname-acl6-basic-2000] quit
[Sysname] ipv6 pim
[Sysname-pim6] bsr-policy 2000
Related commands

c-bsr (IPv6 PIM view)

c-bsr (IPv6 PIM view)
Use c-bsr to configure a candidate-BSR (C-BSR).
Use undo c-bsr to remove a C-BSR.
Syntax
c-bsr ipv6-address [ scope scope-id ] [ hash-length hash-length | priority priority ] *
undo c-bsr ipv6-address [ scope scope-id ]
Default
No C-BSR is configured.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the IPv6 address of a C-BSR.
scope scope-id: Specifies the ID of an IPv6 admin-scoped zone, in the range of 3 to 15. If this option is
not specified, the configured C-BSR used for the global-scoped zone.
hash-length hash-length: Specifies a hash mask length, in the range of 0 to 128. The default setting is
126.
145