Igmp-Snooping Overflow-Replace - HP 6125XLG Command Reference Manual

The configuration made in VLAN view is only effective on the current VLAN and takes preference over the
global configuration.
Examples
# Enable IGMP snooping for VLAN 2 and set the maximum response time for IGMP general queries to
5 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping max-response-time 5
Related commands
igmp-snooping enable
•
• max-response-time (IGMP-snooping view)

igmp-snooping overflow-replace

Use igmp-snooping overflow-replace to enable the multicast group replacement function on a port.
Use undo igmp-snooping overflow-replace to disable the multicast group replacement function on a
port.
Syntax
igmp-snooping overflow-replace [ vlan vlan-list ]
undo igmp-snooping overflow-replace [ vlan vlan-list ]
Default
The multicast group replacement function is disabled.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to ten VLAN items. Each item specifies a VLAN by
its ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to
4094. If this option is not specified, this command takes effect for all VLANs.
Usage guidelines
This command is effective for the multicast groups that a port joins dynamically. If you configure the port
as a static member port for a multicast group, this command is not effective for the multicast group.
The configuration made in proper interface view is only effective on the current port and takes preference
over the global configuration.
Examples
# Enable the multicast group replacement function on Ten-GigabitEthernet 1/1/5 in VLAN 2.
<Sysname> system-view
19