Mld-Snooping Static-Router-Port - HP 6125XLG Command Reference Manual

Usage guidelines
The source-ip ipv6-source-address option is meaningful only for MLDv2 snooping. If MLDv1 snooping is
running, the source-ip ipv6-source-address option does not take effect although you can include
source-ip ipv6-source-address in the command.
Examples
# Configure Ten-GigabitEthernet 1/1/5 in VLAN 2 as a static member port for the IPv6 multicast source
and group (2002::22, FF3E::101).
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping version 2
[Sysname-vlan2] quit
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] mld-snooping static-group ff3e::101 source-ip
2002::22 vlan 2

mld-snooping static-router-port

Use mld-snooping static-router-port to configure a port as a static router port.
Use undo mld-snooping static-router-port to restore the default.
Syntax
mld-snooping static-router-port vlan vlan-id
undo mld-snooping static-router-port { all | vlan vlan-id }
Default
A port is not a static router port.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Parameters
all: Specifies all VLANs.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
Examples
# Configure Ten-GigabitEthernet 1/1/5 in VLAN 2 as a static router port.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] mld-snooping static-router-port vlan 2
118