Ipv6 Pim Hello-Option Dr-Priority; Ipv6 Pim Hello-Option Holdtime - HP 6125XLG Command Reference Manual

Examples
# Enable IPv6 multicast routing, and enable IPv6 PIM-DM on VLAN-interface 100.
<Sysname> system-view
[Sysname] ipv6 multicast routing-enable
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim dm
Related commands
ipv6 multicast routing-enable

ipv6 pim hello-option dr-priority

Use ipv6 pim hello-option dr-priority to set the priority for DR election for an interface.
Use undo ipv6 pim hello-option dr-priority to restore the default.
Syntax
ipv6 pim hello-option dr-priority priority
undo ipv6 pim hello-option dr-priority
Default
The priority for DR election is 1.
Views
Interface view
Predefined user roles
network-admin
Parameters
priority: Sets the priority for DR election, in the range of 0 to 4294967295. A larger value indicates a
higher priority.
Usage guidelines
You can set the priority for DR election in IPv6 PIM view or interface view. The configurations made in
IPv6 PIM view are effective on all interfaces, and the configurations made in interface view are effective
on only the current interface. If you set the priority for DR election in both IPv6 PIM view and interface
view, the configuration in interface view always takes precedence.
Examples
# Set the priority for DR election to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim hello-option dr-priority 3
Related commands
hello-option dr-priority (IPv6 PIM view)

ipv6 pim hello-option holdtime

Use ipv6 pim hello-option holdtime to set the IPv6 PIM neighbor lifetime on an interface.
167