[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim require-genid
ipv6 pim sm
Use ipv6 pim sm to enable IPv6 PIM-SM.
Use undo ipv6 pim sm to disable IPv6 PIM-SM.
Syntax
ipv6 pim sm
undo ipv6 pim sm
Default
IPv6 PIM-SM is disabled.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only after you enable IPv6 multicast routing on the device.
Examples
# Enable IPv6 multicast routing, and enable IPv6 PIM-SM on VLAN-interface 100.
<Sysname> system-view
[Sysname] ipv6 multicast routing-enable
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim sm
Related commands
ipv6 multicast routing-enable
ipv6 pim state-refresh-capable
Use ipv6 pim state-refresh-capable to enable the state refresh feature on the interface.
Use undo ipv6 pim state-refresh-capable to disable the state refresh feature.
Syntax
ipv6 pim state-refresh-capable
undo ipv6 pim state-refresh-capable
Default
The state refresh feature is enabled.
Views
Interface view
173