Ipv6 Multicast Boundary - HP 6125XLG Command Reference Manual

<Sysname> display ipv6 multicast rpf-info 2001::101
RPF information about source 2001::101:
RPF interface: Vlan-interface1, RPF neighbor: FE80::A01:101:1
Referenced prefix/prefix length: 2001::/64
Referenced route type: igp
Route selection rule: preference-preferred
Load splitting rule: disable
Table 38 Command output
Field
RPF information about source 2001::101
RPF interface
RPF neighbor
Referenced prefix/prefix length
Referenced route type
Route selection rule
Load splitting rule
Related commands
display ipv6 multicast forwarding-table
•
• display ipv6 multicast routing-table

ipv6 multicast boundary

Use ipv6 multicast boundary to configure an IPv6 multicast forwarding boundary.
Use undo ipv6 multicast boundary to delete the specified IPv6 multicast forwarding boundary.
Syntax
ipv6 multicast boundary { ipv6-group-address prefix-length | scope { scope-id | admin-local | global |
organization-local | site-local } }
undo ipv6 multicast boundary { ipv6-group-address prefix-length| all | scope { scope-id | admin-local
| global | organization-local | site-local } }
Default
No IPv6 multicast forwarding boundary is configured.
Description
RPF information of the IPv6 multicast source 2001::101.
Type and number of the RPF interface.
IPv6 address (link-local address) of the RPF neighbor.
Referenced route and prefix length.
Type of the referenced route:
•
igp—IPv6 IGP unicast route.
•
egp—IPv6 EGP unicast route.
•
unicast (direct) —IPv6 directly connected unicast route.
•
unicast—Other IPv6 unicast route, such as IPv6 unicast
static route.
RPF route selection rule: An RPF route can be selected by the
priority of the routing protocol or by the longest match of the
destination address in the routing table.
Whether the load sharing rule is enabled.
129