Timer Hello (Ipv6 Pim View); Timer Join-Prune (Ipv6 Pim View) - HP 6125XLG Command Reference Manual

timer hello (IPv6 PIM view)

Use timer hello to set the global interval for sending hello messages.
Use undo timer hello to restore the default.
Syntax
timer hello interval
undo timer hello
Default
The global interval for sending hello messages is 30 seconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
interval: Sets global interval (in seconds) for sending hello messages, in the range of 0 to 18000. A value
of 0 means that no hello messages are sent.
Usage guidelines
You can set the interval for sending hello messages in IPv6 PIM view or interface view. The configurations
made in IPv6 PIM view are effective on all interfaces, and the configurations made in interface view are
effective on only the current interface. If you set the interval in both IPv6 PIM view and interface view, the
configuration in interface view always takes precedence.
Examples
# Set the global interval for sending hello messages to 40 seconds.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] timer hello 40
Related commands
ipv6 pim timer hello

timer join-prune (IPv6 PIM view)

Use timer join-prune to configure the global interval for sending the join/prune messages.
Use undo timer join-prune to restore the default.
Syntax
timer join-prune interval
undo timer join-prune
Default
The global interval for sending the join/prune messages is 60 seconds.
184