HP 6125XLG Command Reference Manual page 69

PIM mode: Sparse
PIM DR: 10.1.1.2
PIM DR Priority (configured): 1
PIM neighbor count: 1
PIM hello interval: 30 s
PIM LAN delay (negotiated): 500 ms
PIM LAN delay (configured): 500 ms
PIM override interval (negotiated): 2500 ms
PIM override interval (configured): 2500 ms
PIM neighbor tracking (negotiated): disabled
PIM neighbor tracking (configured): disabled
PIM generation ID: 0xF5712241
PIM require generation ID: disabled
PIM hello hold interval: 105 s
PIM assert hold interval: 180 s
PIM triggered hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM BSR domain border: disabled
PIM BFD: disabled
Number of routers on network not using DR priority: 0
Number of routers on network not using LAN delay: 0
Number of routers on network not using neighbor tracking: 2
Table 22 Command output
Field
PIM mode
PIM DR
PIM DR Priority (configured)
PIM neighbor count
PIM hello interval
PIM LAN delay (negotiated)
PIM LAN delay (configured)
PIM override interval (negotiated)
PIM override interval (configured)
PIM neighbor tracking (negotiated)
PIM neighbor tracking (configured)
PIM require generation ID
PIM hello hold interval
PIM assert hold interval
PIM triggered hello delay
PIM J/P interval
Description
PIM mode: dense or sparse.
IP address of the DR.
Configured priority for DR election.
Total number of PIM neighbors.
Interval between two hello messages.
Negotiated delay for sending prune messages.
Configured delay for sending prune messages.
Negotiated interval between two override messages.
Configured interval between two override messages.
Negotiated neighbor tracking status: enabled or disabled.
Configured neighbor tracking status: enabled or disabled.
Whether the function of discarding hello messages without
Generation_ID is enabled.
PIM neighbor lifetime.
Assert holdtime timer.
Maximum delay for sending hello messages.
Interval between two join/prune messages.
63