Register-Whole-Checksum (Ipv6 Pim View); Source-Lifetime (Ipv6 Pim View) - HP 6125XLG Command Reference Manual

[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule permit ipv6 source 3:1:: 64 destination ff0e:13:: 64
[Sysname-acl6-adv-3000] quit
[Sysname] ipv6 pim
[Sysname-pim6] register-policy 3000

register-whole-checksum (IPv6 PIM view)

Use register-whole-checksum to configure the device to calculate the checksum based on an entire
register message.
Use undo register-whole-checksum to restore the default.
Syntax
register-whole-checksum
undo register-whole-checksum
Default
The device calculates the checksum based on the header of a register message.
Views
IPv6 PIM view
Predefined user roles
network-admin
Examples
# Configure the device to calculate the checksum based on an entire register message.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] register-whole-checksum

source-lifetime (IPv6 PIM view)

Use source-lifetime to set the IPv6 multicast source lifetime.
Use undo source-lifetime to restore the default.
Syntax
source-lifetime time
undo source-lifetime
Default
The lifetime of an IPv6 multicast source is 210 seconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
178