Source-Deny (Igmp-Snooping View) - HP 6125XLG Command Reference Manual

[Sysname] igmp-snooping
[Sysname-igmp-snooping] router-aging-time 100
Related commands
igmp-snooping router-aging-time

source-deny (IGMP-snooping view)

Use source-deny to enable multicast source port filtering on a specified port to filter out all the received
multicast data packets. This allows the port to connect to only multicast receivers rather than to multicast
sources.
Use undo source-deny to disable multicast source port filtering.
Syntax
source-deny port interface-list
undo source-deny port interface-list
Default
Multicast source port filtering is not enabled, and the port can connect to both multicast sources and
multicast receivers.
Views
IGMP-snooping view
Predefined user roles
network-admin
Parameters
port interface-list: Specifies a port list. You can specify multiple ports or port ranges by providing the
argument in the form of interface-list = { interface-type interface-number [ to interface-type
interface-number ] }.
Usage guidelines
The global configuration is effective for all specified ports, and has the same configuration priority as the
configuration on the current port.
Examples
# Enable multicast source port filtering on interfaces Ten-GigabitEthernet 1/1/5 through
Ten-GigabitEthernet 1/1/8.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] source-deny port ten-gigabitethernet 1/1/5 to
ten-gigabitethernet 1/1/8
Related commands
igmp-snooping source-deny
28