Ipv6 Pim Hello-Option Lan-Delay - HP 6125XLG Command Reference Manual

Use undo ipv6 pim hello-option holdtime to restore the default.
Syntax
ipv6 pim hello-option holdtime time
undo ipv6 pim hello-option holdtime
Default
The IPv6 PIM neighbor lifetime is 105 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
time: Sets the IPv6 PIM neighbor lifetime (in seconds), in the range of 1 to 65535. A value of 65535
means that the IPv6 PIM neighbor is always reachable.
Usage guidelines
You can set the IPv6 PIM neighbor lifetime in IPv6 PIM view or interface view. The configurations made
in IPv6 PIM view are effective on all interfaces, and the configurations made in interface view are
effective on only the current interface. If you set the IPv6 PIM neighbor lifetime in both IPv6 PIM view and
interface view, the configuration in interface view always takes precedence.
Examples
# Sets the IPv6 PIM neighbor lifetime to 120 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim hello-option holdtime 120
Related commands
hello-option holdtime (IPv6 PIM view)

ipv6 pim hello-option lan-delay

Use ipv6 pim hello-option lan-delay to set the prune delay on an interface.
Use undo ipv6 pim hello-option lan-delay to restore the default.
Syntax
ipv6 pim hello-option lan-delay delay
undo ipv6 pim hello-option lan-delay
Default
The prune delay is 500 milliseconds.
Views
Interface view
Predefined user roles
network-admin
168