C-Bsr (Pim View) - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
Parameters
acl-number: Specifies an IPv4 basic ACL by its number, in the range of 2000 to 2999.
Usage guidelines
In an ACL, the source field specifies the source address range for the legal BSR. If you specify a VPN
instance in the ACL, the ACL does not take effect. The other optional parameters except the fragment
keyword and the time-range keyword are ignored.
Examples
# Configure the legal BSR address range to 10.1.1.0/24, so that only the devices on the subnet
10.1.1.0/24 can act as the BSR.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 10.1.1.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] pim
[Sysname-pim] bsr-policy 2000
Related commands

c-bsr (PIM view)

c-bsr (PIM view)
Use c-bsr to configure a candidate-BSR (C-BSR).
Use undo c-bsr to remove a C-BSR.
Syntax
c-bsr ip-address [ scope group-address { mask-length | mask } ] [ hash-length hash-length | priority
priority ] *
undo c-bsr ip-address [ scope group-address { mask-length | mask } ]
Default
No C-BSR is configured.
Views
PIM view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address of a C-BSR.
scope group-address: Specifies a multicast group address to which the C-BSR in an admin-scoped zone
is designated, in the range of 239.0.0.0 to 239.255.255.255. If this option is not specified, the
configured C-BSR is designated to the global-scoped zone.
mask-length: Specifies the address mask length, in the range of 8 to 32.
55