HP 6125XLG Command Reference Manual page 165

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal
number between 0 and F, inclusive. If no IPv6 multicast group is specified, this command displays
information about all RPs for IPv6 multicast groups.
Examples
# Display information about the RP for the IPv6 multicast group FF0E::101.
<Sysname> display ipv6 pim rp-info ff0e::101
BSR RP address is: 7:12::1
Priority: 192
HoldTime: 180
Uptime: 03:01:10
Expires: 00:02:30
Static RP address is: 7:12::1
Preferred: No
Configured ACL: 2003
RP mapping for this group is: 7:12::1 (local host)
# Display information about all RPs for all IPv6 multicast groups.
<Sysname> display ipv6 pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: FF00::/8
RP address
8:12::2 (local)
Group/MaskLen: FF23::/92
RP address
7:12::1 (local)
Static RP information:
RP address
3:3::1
3:3::3
3:3::4
3:3::5
Table 48 Command output
Field
Group/MaskLen
Priority HoldTime
192 180
Priority HoldTime
192 180
ACL Mode
2000 pim-sm
2002 pim-sm
pim-sm
2002 pim-sm
Description
IPv6 multicast group to which the RP is designated
159
Uptime Expires
03:01:36 00:02:29
Uptime Expires
00:00:39 00:02:57
Preferred
No
No
No
Yes