Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If no IPv6 multicast source is
specified, this command displays information about all routes that IPv6 PIM uses.
Examples
# Display information about all routes that IPv6 PIM uses.
<Sysname> display ipv6 pim claimed-route
RPF-route selecting rule: longest-match
Route/mask: 7:11::/64 (unicast (direct))
RPF interface: Vlan-interface2, RPF neighbor: 8::2
Total number of (S,G) or (*,G) dependent on this route entry: 4
(7:11::10, ff1e::1)
(7:11::10, ff1e::2)
(7:11::10, ff1e::3)
(*, ff1e::4)
Route/mask: 7:12::/64 (unicast)
RPF interface: Vlan-interface2, RPF neighbor: 8::3,
Total number of (S,G) or (*,G) dependent on this route entry: 2
(7:12::10, ff1e::1)
(7:12::10, ff1e::2)
Table 42 Command output
Field
Route/mask
RPF interface
RPF neighbor
Total number of (S,G) or (*,G) dependent on
this route entry
display ipv6 pim c-rp
Use display ipv6 pim c-rp to display C-RP information in the IPv6 PIM-SM domain.
Syntax
display ipv6 pim c-rp [ local ]
Description
Route entry. Route types in parentheses include:
•
igp—IGP unicast route.
•
egp—EGP unicast route.
•
unicast (direct)—Directly connected unicast route.
•
unicast—Other unicast route, such as static unicast route.
Name of the RPF interface.
IPv6 address of the RPF neighbor.
Total number (S, G) or (*, G) entries dependent on the RPF
route and their details.
150