Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the range of FFxy::/16,
where x and y represent any hexadecimal number between 0 and F, inclusive. If you do not specify an
IPv6 multicast group, this command displays IPv6 PIM routing entries for all IPv6 multicast groups.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.
prefix-length: Specifies the address prefix length. The default value is 128. For an IPv6 multicast group
address, the value of this argument is in the range of 8 to 128. For an IPv6 multicast source address, the
value of this argument is in the range of 0 to 128.
flags flag-value: Specifies a flag. If you do not specify a flag, this command displays IPv6 PIM routing
entries that contain any flags.
The following lists the values of the flag-value argument and their meanings:
•
act: Specifies IPv6 PIM routing entries that have been used for routing data.
del: Specifies IPv6 PIM routing entries to be deleted.
•
•
exprune: Specifies IPv6 PIM routing entries containing outgoing interfaces pruned by other IPv6
multicast routing protocols.
ext: Specifies IPv6 PIM routing entries containing outgoing interfaces provided by other multicast
•
routing protocols.
loc: Specifies IPv6 PIM routing entries on the devices that reside on the same subnet as the IPv6
•
multicast source.
•
niif: Specifies IPv6 PIM routing entries containing unknown incoming interfaces.
nonbr: Specifies IPv6 PIM routing entries with IPv6 PIM neighbor lookup failure.
•
rpt: Specifies IPv6 PIM routing entries on the RPT branches where (S, G) prunes have been sent to
•
the RP.
spt: Specifies IPv6 PIM routing entries on the SPT.
•
swt: Specifies IPv6 PIM routing entries in the process of RPT-to-SPT switchover.
•
•
wc: Specifies IPv6 PIM routing entries with wildcards.
fsm: Displays detailed information about the finite state machine.
incoming-interface interface-type interface-number: Specifies an incoming interface. If you do not
specify an incoming interface, this command displays IPv6 PIM routing entries that contain any incoming
interfaces.
interface-type interface-number: Specifies an interface by its type and number.
mode mode-type: Specifies an IPv6 PIM mode. If you do not specify an IPv6 PIM mode, this command
displays IPv6 PIM routing entries in all modes. The available IPv6 PIM modes include:
dm: Specifies IPv6 PIM-DM.
•
•
sm: Specifies IPv6 PIM-SM.
outgoing-interface { exclude | include | match } interface-type interface-number: Specifies an outgoing
interface. If you do not specify an outgoing interface, this command displays IPv6 PIM routing entries
containing any outgoing interfaces. Whether a specified outgoing interface is contained in the IPv6 PIM
routing table depends on the following conditions:
•
If you specify an excluded interface, this command displays IPv6 PIM routing entries that do not
contain the specified outgoing interface.
156