display ipv6 pim interface
Use display ipv6 pim interface to display IPv6 PIM information on an interface.
Syntax
display ipv6 pim interface [ interface-type interface-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command displays IPv6 PIM information on all interfaces.
verbose: Displays detailed IPv6 PIM information. If you do not specify this keyword, this command
displays brief IPv6 PIM information.
Examples
# Display IPv6 PIM brief information on all interfaces.
<Sysname> display ipv6 pim interface
Interface
Vlan1
Table 44 Command output
Field
Interface
NbrCnt
HelloInt
DR-Pri
DR-Address
# Display detailed IPv6 PIM information on VLAN-interface 1.
<Sysname> display ipv6 pim interface vlan-interface 1 verbose
Interface: Vlan-interface1, FE80::200:5EFF:FE04:8700
PIM version: 2
PIM mode: Sparse
PIM DR: FE80::200:AFF:FE01:101
PIM DR Priority (configured): 1
PIM neighbor count: 1
PIM hello interval: 30 s
PIM LAN delay (negotiated): 500 ms
PIM LAN delay (configured): 500 ms
PIM override interval (negotiated): 2500 ms
PIM override interval (configured): 2500 ms
NbrCnt
HelloInt
DR-Pri
1
30
1
Description
Name of the interface.
Number of IPv6 PIM neighbors.
Interval for sending hello messages.
Priority for DR election.
IPv6 address (link-local address) of the DR.
152
DR-Address
FE80::200:5EFF:FE04:8700