Igmp Static-Group; Igmp Version - HP 6125XLG Command Reference Manual

igmp static-group

Use igmp static-group to configure an interface as a static member of the specified multicast group or the
specified multicast source and group.
Use undo igmp static-group to restore the default.
Syntax
igmp static-group group-address [ source source-address ]
undo igmp static-group { all | group-address [ source source-address ] }
Default
An interface is not a static member of any multicast group or multicast source and group.
Views
Interface view
Predefined user roles
network-admin
Parameters
group-address: Specifies a multicast group by its address, in the range of 224.0.1.0 to
239.255.255.255.
source-address: Specifies a multicast source address. If this argument is not specified, the command
configures an interface as a static member of the multicast groups with all multicast source addresses.
all: Specifies all multicast groups that the interface has statically joined.
Examples
# Configure VLAN-interface 100 as a static member of the multicast group 224.1.1.1.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp static-group 224.1.1.1
# Configure VLAN-interface 100 as a static member of the multicast source and group (192.168.1.1,
232.1.1.1).
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp static-group 232.1.1.1 source 192.168.1.1

igmp version

Use igmp version to specify the IGMP version for an interface.
Use undo igmp version to restore the default.
Syntax
igmp version version-number
undo igmp version
Default
The default IGMP version is version 2.
50