Display Igmp-Snooping Static-Group - HP 6125XLG Command Reference Manual

slot slot-number: Specifies a member device by its member ID. The slot-number argument specifies an IRF
member device ID. If no member device is specified, this command displays information about the
dynamic router ports on the master device in the IRF fabric.
Examples
# Display information about the dynamic router ports in VLAN 2.
<Sysname> display igmp-snooping router-port vlan 2
VLAN 2:
Router slots (0 in total):
Router ports (2 in total):
XGE1/1/5
XGE1/1/6
Table 3 Command output
Field
VLAN 2
Router ports (2 in total)
(00:01:30)
Related commands
reset igmp-snooping router-port
display igmp-snooping static
Use display igmp-snooping static
entries.
Syntax
display igmp-snooping static
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-address: Specifies a multicast group by its IP address, in the range of 224.0.1.0 to
239.255.255.255. If no multicast group is specified, this command displays information about the static
IGMP snooping forwarding entries for all multicast groups.
source-address: Specifies a multicast source by its IP address. If no multicast source is specified, this
command displays information about the static IGMP snooping forwarding entries for all multicast
sources.
(00:01:30)
(00:00:23)
Description
VLAN ID.
Total number of dynamic router ports and the port list.
Remaining time of the aging timer for the dynamic router port. On IRF devices, to
display the remaining time for a non-aggregate interface on a member device that
is not the master device in the IRF fabric, you must specify the slot slot-number option.
For an aggregate interface, you do not need to do this.
group
-
group to display information about static IGMP snooping forwarding
-
group [ group-address | source-address ] * [ vlan vlan-id ] [ verbose ] [ slot
-
4