Holdtime Join-Prune (Ipv6 Pim View); Ipv6 Pim - HP 6125XLG Command Reference Manual

ipv6 pim hello-option lan-delay
•
• ipv6 pim hello-option override-interval

holdtime join-prune (IPv6 PIM view)

Use holdtime join-prune to set the global joined/pruned state holdtime timer.
Use undo holdtime join-prune to restore the default.
Syntax
holdtime join-prune time
undo holdtime join-prune
Default
The global joined/pruned state holdtime timer is 210 seconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
time: Sets the joined/pruned state holdtime timer (in seconds), in the range of 1 to 65535.
Usage guidelines
You can set the joined/pruned state holdtime timer in IPv6 PIM view or interface view. The configurations
made in IPv6 PIM view are effective on all interfaces, and the configurations made in interface view are
effective on only the current interface. If you set the joined/pruned state holdtime timer in both IPv6 PIM
view and interface view, the configuration in interface view always takes precedence.
Examples
# Set the global joined/pruned state holdtime timer to 280 seconds.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] holdtime join-prune 280
Related commands
ipv6 pim holdtime join-prune

ipv6 pim

Use ipv6 pim to enter IPv6 PIM view.
Use undo ipv6 pim to remove all configurations in IPv6 PIM view.
Syntax
ipv6 pim
undo ipv6 pim
164