Ipv6 Pim Holdtime Join-Prune; Ipv6 Pim Neighbor-Policy - HP 6125XLG Command Reference Manual

Related commands
hello-option lan-delay (IPv6 PIM view)
•
hello-option override-interval (IPv6 PIM view)
•
• ipv6 pim hello-option lan-delay

ipv6 pim holdtime join-prune

Use ipv6 pim holdtime join-prune to set the joined/pruned state holdtime timer on an interface.
Use undo ipv6 pim holdtime join-prune to restore the default.
Syntax
ipv6 pim holdtime join-prune time
undo ipv6 pim holdtime join-prune
Default
The joined/pruned state holdtime timer is 210 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
time: Sets the joined/pruned state holdtime timer (in seconds), in the range of 1 to 65535.
Usage guidelines
You can set the joined/pruned state holdtime timer in IPv6 PIM view or interface view. The configurations
made in IPv6 PIM view are effective on all interfaces, and the configurations made in interface view are
effective on only the current interface. If you set the joined/pruned state holdtime timer in both IPv6 PIM
view and interface view, the configuration in interface view always takes precedence.
Examples
# Set the joined/pruned state holdtime timer to 280 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim holdtime join-prune 280
Related commands
holdtime join-prune (IPv6 PIM view)

ipv6 pim neighbor-policy

Use ipv6 pim neighbor-policy to configure a legal source address range for hello messages to guard
against hello message spoofing.
Use undo ipv6 pim neighbor-policy to restore the default.
Syntax
ipv6 pim neighbor-policy acl6-number
171