Display L2-Multicast Forwarding-Table - HP 6125XLG Command Reference Manual

Table 6 Command output
Field
general queries
specific queries
reports
leaves
reports with right and wrong records
specific sg queries
error IGMP messages
Related commands
reset igmp-snooping statistics

display l2-multicast forwarding-table

Use display l2-multicast forwarding-table to display information about Layer 2 multicast forwarding
entries.
Syntax
display l2-multicast forwarding-table [ group group-address | source source-address ] * [ vlan vlan-id ]
[ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group group-address: Specifies a multicast group by its IP address. The group-address argument can be
0.0.0.0 or in the range of 224.0.1.0 to 239.255.255.255. If no multicast group is specified, this
command displays information about the Layer 2 multicast forwarding entries for all multicast groups.
source source-address: Specifies a multicast source by its IP address. If no multicast source is specified,
this command displays information about the Layer 2 multicast forwarding entries for all multicast
sources.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. If no VLAN is
specified, this command displays information about the Layer 2 multicast forwarding entries for all
VLANs.
slot slot-number: Specifies a member device by its member ID. The slot-number argument specifies an IRF
member device ID. If no member device is specified, this command displays information about the Layer
2 multicast forwarding entries on the master device in the IRF fabric.
Examples
# Display information about the Layer 2 multicast forwarding entries in VLAN 2.
<Sysname> display l2-multicast forwarding-table vlan 2
Description
Number of general queries.
Number of group-specific queries.
Number of reports.
Number of leave messages.
Number of reports with correct and incorrect records.
Number of group-and-source-specific queries.
Number of IGMP messages with errors.
7