HP 6125XLG Command Reference Manual page 191

Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
interval: Sets the global interval (in seconds) for sending the join/prune messages, in the range of 0 to
18000. A value of 0 means that no join or prune messages are sent.
Usage guidelines
You can set the interval for sending the join/prune messages in IPv6 PIM view or interface view. The
configurations made in IPv6 PIM view are effective on all interfaces, and the configurations made in
interface view are effective on only the current interface. If you set the interval in both IPv6 PIM view and
interface view, the configuration in interface view always takes precedence.
Examples
# Set the global interval for sending the join/prune messages to 80 seconds.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] timer join-prune 80
Related commands
ipv6 pim timer join-prune
185