Pim Timer Graft-Retry; Pim Timer Hello - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
Examples
# Disable state refresh on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] undo pim state-refresh-capable
Related commands
• state-refresh-interval (PIM view)
state-refresh-rate-limit (PIM view)
•
• state-refresh-ttl (PIM view)

pim timer graft-retry

Use pim timer graft-retry to set the graft retry timer.
Use undo pim timer graft-retry to restore the default.
Syntax
pim timer graft-retry interval
undo pim timer graft-retry
Default
The graft retry timer is 3 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Specifies a graft retry timer (in seconds), in the range of 1 to 65535.
Examples
# Set the graft retry timer to 80 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim timer graft-retry 80

pim timer hello

Use pim timer hello to set the interval for sending hello messages on an interface.
Use undo pim timer hello to restore the default.
Syntax
pim timer hello interval
84