Display Ipv6 Multicast Rpf-Info - HP 6125XLG Command Reference Manual

Examples
# Display information about the IPv6 multicast routing table.
<Sysname> display ipv6 multicast routing-table
Total 1 entry
00001. (2001::2, FFE3::101)
Uptime: 00:00:14
Upstream Interface: Vlan-interface1
List of 1 downstream interface
Table 37 Command output
Field
Total 1 entry
00001
(2001::2, FFE3::101)
Uptime
Upstream Interface
List of 1 downstream interface
Related commands
reset ipv6 multicast routing-table

display ipv6 multicast rpf-info

Use display ipv6 multicast rpf-info to display RPF information of an IPv6 multicast source.
Syntax
display ipv6 multicast rpf-info ipv6-source-address [ ipv6-group-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address, in the range of FFxy::/16 (excluding
FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y" represent any hexadecimal number
from 0 to F.
Examples
# Display all RPF information of the multicast source with an IPv6 address 2001::101.
1: Vlan-interface2
Description
Total number of (S, G) entries in the IPv6 multicast routing table.
Sequence number of the (S, G) entry.
(S, G) entry in the IPv6 multicast forwarding table.
Length of time for which the (S, G) entry has been up.
Upstream interface of the (S, G) entry. IPv6 multicast packets should
arrive through this interface.
Downstream interface list. These interfaces must forward multicast
packets.
128