Displaying And Maintaining Quick Ead Deployment; Quick Ead Deployment Configuration Example - 3Com WX3000 Series Operation Manual

Follow these steps to configure the ACL timer:
To do...
Enter system view
Set the ACL timer

Displaying and Maintaining Quick EAD Deployment

To do...
Display configuration
information about quick EAD
deployment

Quick EAD Deployment Configuration Example

Network requirements
As shown in Figure
Web server and the Internet. The user will be redirected to the Web server to download the
authentication client and upgrade software when accessing the Internet through IE before passing
authentication. After passing authentication, the user can access the Internet.
Figure 2-1 Network diagram for quick EAD deployment
IP network
GE 1/0/1
IP:192.168.0.110
PC
IP:192 .168 .0.109
system-view
dot1x timer acl-timeout
acl-timeout-value
display dot1x [ sessions |
statistics ] [ interface
interface-list ]
2-1, a user (PC) connects to the device (Switch) directly. The device connects to the
Switch
Web Server
IP:192.168.0.111
Use the command...
Use the command...
2-3
Remarks
—
Required
By default, the ACL timeout
period is 30 minutes.
Remarks
Available in any view.