3Com WX3000 Series Operation Manual page 4

24 SNMP-RMON
25 Multicast
26 NTP
27 SSH
28 File System Management
29 FTP-SFTP-TFTP
30 Information Center
31 System Maintenance and Debugging
32 VLAN-VPN
33 HWPing
34 DNS
35 Smart Link-Monitor Link
36 PoE-PoE Profile
37 Routing Protocol
38 UDP Helper
39 Appendix
Conventions
The manual uses the following conventions:
Command conventions
Convention
Boldface
italic
[ ]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
[ x | y | ... ] *
Part
The keywords of a command line are in Boldface.
Command arguments are in italic.
Items (keywords or arguments) in square brackets [ ] are optional.
Alternative items are grouped in braces and separated by vertical bars.
One is selected.
Optional alternative items are grouped in square brackets and
separated by vertical bars. One or none is selected.
Alternative items are grouped in braces and separated by vertical bars.
A minimum of one or a maximum of all can be selected.
Optional alternative items are grouped in square brackets and
separated by vertical bars. Many or none can be selected.
Introduces the configuration for network management
through SNMP and RMON
Introduces IGMP snooping and the related
configuration.
Introduces NTP and the related configuration.
Introduces SSH2.0 and the related configuration.
Introduces basic configuration for file system
management.
Introduces basic configuration for FTP, SFTP and
TFTP, and the applications.
Introduces information center configuration.
Introduces daily system maintenance and debugging.
Introduces VLAN VPN and the related configuration.
Introduces HWPing and the related configuration.
Introduces DNS and the related configuration.
Introduces Smart Link, Monitor Link and the related
configuration.
Introduces PoE, PoE profile and the related
configuration.
Introduces the static route, RIP, and IP route policy
configurations.
Introduces UDP Helper and the related configuration.
Lists the acronyms used in this manual.
Description
Contents