Basic Port Configuration; Ethernet Port Overview; Types And Numbers Of Ethernet Ports; Combo Ports Mapping Relations - 3Com WX3000 Series Operation Manual

1

Basic Port Configuration

The term switch used throughout this chapter refers to a switching device in a generic sense or the
switching engine of a unified switch in the WX3000 series.
The sample output information in this manual was created on the WX3024. The output information
on your device may vary.

Ethernet Port Overview

Types and Numbers of Ethernet Ports

Table 1-1 lists the types and numbers of the Ethernet ports available on the WX3000 series devices.
Table 1-1 Description of Ethernet port type and port number
Series
WX3024
WX3010
WX3008

Combo Ports Mapping Relations

An SFP port and its corresponding 10/100/1000Base-T autosensing Ethernet port form a Combo port.
That is, only one of the two ports forming the Combo port can be used at a time.
mapping relations between the ports forming the Combo port.
Table 1-2 Mapping relations between the ports forming the Combo port
Series
WX3024
10/100/1000Base-T autosensing
Ethernet ports
24
8
8
1000Base-X SFP port
GigabitEthernet 1/0/25
GigabitEthernet 1/0/26
GigabitEthernet 1/0/27
GigabitEthernet 1/0/28
1000Base-X SFP
ports
4
2
None
10/100/1000Base-T autosensing
GigabitEthernet 1/0/22
GigabitEthernet 1/0/24
GigabitEthernet 1/0/21
GigabitEthernet 1/0/23
1-1
Extension
slots
2
None
None
Table 1-2 shows the
Ethernet port