Vlan Configuration; Configuration Task List; Basic Vlan Configuration - 3Com WX3000 Series Operation Manual

2

VLAN Configuration

VLAN Configuration

Configuration Task List

Complete the following tasks to configure VLAN:

Basic VLAN Configuration

Basic VLAN Interface Configuration
Displaying and Maintaining VLAN
Basic VLAN Configuration
Follow these steps to make basic VLAN configuration:
To do...
Enter system view
Create multiple VLANs in
batch
Create a VLAN and enter
VLAN view
Assign a name for the
current VLAN
Specify the description
string of the current VLAN
VLAN 1 is the system default VLAN, which needs not to be created and cannot be removed, either.
The VLAN you created in the way described above is a static VLAN. On the switch, there are
dynamic VLANs which are registered through GVRP. For details, refer to "GVRP" part of this
manual.
When you use the vlan command to create VLANs, if the destination VLAN is an existing dynamic
VLAN, it will be transformed into a static VLAN and the switch will output the prompt information.
Task
Use the command...
system-view
vlan { vlan-id1 to vlan-id2 |
all }
vlan vlan-id
name text
description text
Required
Optional
Optional
—
Optional
Required
By default, there is only one VLAN, that
is, the default VLAN (VLAN 1).
Optional
By default, the name of a VLAN is its
VLAN ID. "VLAN 0001" for example.
Optional
By default, the description string of a
VLAN is its VLAN ID. "VLAN 0001" for
example.
2-1
Remarks
Remarks