3Com WX3000 Series Operation Manual page 507

To do...
Enter public key edit view
Configure a public key for the
client
Return to public key view from
public key edit view
Exit public key view and return
to system view
Follow these steps to import the RSA public key from a public key file:
To do...
Enter system view
Import the public key from a
public key file
You can also use the following commands to configure the client's RSA public key on the server.
Follow these steps to configure the client RSA public key manually:
To do...
Enter system view
Enter public key view
Enter public key edit view
Configure the client RSA public
key
Return from public key code
view to public key view
Return from public key view to
system view
Use the command...
public-key-code begin
Enter the content of the public
key
public-key-code end
peer-public-key end
Use the command...
system-view
public-key peer keyname
import sshkey filename
Use the command...
system-view
rsa peer-public-key keyname
public-key-code begin
Enter the content of the RSA
public key
public-key-code end
peer-public-key end
1-10
Remarks
—
When you input the key data,
spaces are allowed between
the characters you input
(because the system can
remove the spaces
automatically); you can also
press <Enter> to continue your
input at the next line. But the
key you input should be a
hexadecimal digit string coded
in the public key format.
—
—
Remarks
—
Required
Remarks
—
Required
—
The content must be a
hexadecimal string that is
generated randomly by the
SSH-supported client software
and coded compliant to PKCS.
Spaces and carriage returns
are allowed between
characters.
—
When you exit public key code
view, the system automatically
saves the public key.
—