System Information Format - 3Com WX3000 Series Operation Manual

Module name
NTP
PKI
RDS
RMON
RSA
SHELL
SNMP
SOCKET
SSH
SYSMIB
TAC
TELNET
TFTPC
VLAN
VTY
XM
default
To sum up, the major task of the information center is to output the three types of information of the
modules onto the ten channels in terms of the eight severity levels and according to the user's settings,
and then redirect the system information from the ten channels to the six output directions.

System Information Format

System information has the following format:
<priority> timestamp sysname module/level/digest:content
The closing set of angel brackets < >, the space, the forward slash /, and the colon are all required
in the above format.
Before the <priority> may have %, "#, or * followed with a space, indicating log, alarm, or debugging
information respectively.
Below is an example of the format of log information to be output to a log host:
% <188>Dec 6 10:44:55:283 2006 device NTP/5/NTP_LOG:- 1 - NTP service enable
("-1-" indicates that the unit number of the device is 1.)
What follows is a detailed explanation of the fields involved:
Network time protocol module
Public key infrastructure module
Radius module
Remote monitor module
Revest, Shamir and Adleman encryption module
User interface module
Simple network management protocol module
Socket module
Secure shell module
System MIB module
HWTACACS module
Telnet module
TFTP client module
Virtual local area network module
Virtual type terminal module
XMODEM module
Default settings for all the modules
1-4
Description