Aaa Configuration Examples; Remote Radius Authentication Of Telnet/Ssh Users - 3Com WX3000 Series Operation Manual

Displaying and maintaining HWTACACS protocol information
To do...
Display the configuration or
statistic information about one
specific or all HWTACACS
schemes
Display buffered non-response
stop-accounting requests
Clear HWTACACS message
statistics
Delete buffered non-response
stop-accounting requests

AAA Configuration Examples

Remote RADIUS Authentication of Telnet/SSH Users

The configuration procedure for remote authentication of SSH users by RADIUS server is similar to that
for Telnet users. The following text only takes Telnet users as example to describe the configuration
procedure for remote authentication.
Network requirements
In the network environment shown in
Telnet users logging into the switching engine are authenticated by the RADIUS server.
A RADIUS authentication server with IP address 10.110.91.164 is connected to the device.
On the device, set the shared key it uses to exchange messages with the authentication RADIUS
server to "aabbcc".
A IMC server is used as the RADIUS server. You can select extended as the server-type in a
RADIUS scheme.
On the RADIUS server, set the shared key it uses to exchange messages with the device to
"aabbcc," set the authentication port number, and add Telnet user names and login passwords.
The Telnet user names added to the RADIUS server must be in the format of userid@isp-name if you
have configured the device to include domain names in the user names to be sent to the RADIUS
server in the RADIUS scheme.
Use the command...
display hwtacacs
[ hwtacacs-scheme-name [ statistics ] ]
display stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
reset hwtacacs statistics { accounting |
authentication | authorization | all }
reset stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
Figure 2-1, you are required to configure the device so that the
2-26
Remarks
Available in any view.
Available in user
view.