Configuring A Downlink Port - 3Com WX3000 Series Operation Manual

Configure the
uplink port for
the Monitor
Link group

Configuring a Downlink Port

Follow these steps to configure a downlink port:
Enter system view
Enter the specified Monitor Link group view
Configure a
downlink
port for the
Monitor Link
group
To do...
Configure the specified link
aggregation group as the
uplink port of the Monitor
Link group
Configure the specified
Smart Link group as the
uplink port of the Monitor
Link group
Monitor
Link group
Configure
view
the specified
Ethernet port
as the uplink
port of the
Ethernet
Monitor Link
port view
group
To do...
Configure the specified link
aggregation group as a
downlink port of the Monitor
Link group
Monitor
Link group
Configure
view
the specified
Ethernet port
as a
downlink
Ethernet
port of the
port view
Monitor Link
group
Use the command...
link-aggregation group
group-id uplink
smart-link group group-id
uplink
port interface-type
interface-number uplink
quit
interface interface-type
interface-number
port monitor-link group
group-id uplink
Use the command...
system-view
monitor-link group group-id
link-aggregation group
group-id downlink
port interface-type
interface-number downlink
quit
interface interface-type
interface-number
port monitor-link group
group-id downlink
2-4
Remarks
Required
Use any of the
three approaches
Remarks
—
Required
Required
Use either
approach