Displaying And Maintaining Ead Fast Deployment - 3Com 4210G Series Configuration Manual

24-port/48-port

Hide thumbs Also See for 4210G Series:

Getting started manual (78 pages)

Table of Contents

Configuring the IE redirect URL

Follow these steps to configure the IE redirect URL:

Enter system view

Configure the IE redirect URL

The redirect URL and the freely accessible network segment must belong to the same network

segment. Otherwise, the specified URL is unaccessible.

Setting the EAD rule timeout time

With the EAD fast deployment function, a user is authorized by an EAD rule (generally an ACL rule) to

access the freely accessible network segment before passing authentication. After successful

authentication, the occupied ACL will be released. If a large amount of users access the freely

accessible network segment but fail the authentication, ACLs will soon be used up and new users will

be rejected.

An EAD rule timeout timer is designed to solve this problem. When a user accesses the network, this

timer is started. If the user neither downloads client software nor performs authentication before the

timer expires, the occupied ACL will be released so that other users can use it. When there are a large

number of users, you can shorten the timeout time to improve the ACL usage efficiency.

Follow these steps to set the EAD rule timeout time:

Enter system view

Set EAD rule timeout time