Displaying And Maintaining Qos Profile - 3Com WX3000 Series Operation Manual

Configuration procedure
Follow these steps to configure to apply a QoS profile dynamically:
To do...
Enter system view
Enter Ethernet port view
Configure the
mode to apply a
QoS profile as
port-based
Specify
the mode
to apply a
Configure the
QoS
mode to apply a
profile
QoS profile as
user-based
Follow these steps to apply a QoS profile manually:
Enter system view
In system view
Apply a
QoS profile
to specific
In
ports
Ethernet
port view

Displaying and Maintaining QoS Profile

To do...
Display QoS profile
configuration
Use the command...
system-view
interface interface-type
interface-number
qos-profile port-based
undo qos-profile port-based
To do...
Enter
Ethernet port
view
Apply a QoS
profile to the
current port
Use the command...
display qos-profile { all | name
profile-name | interface interface-type
interface-number | user user-name }
Use the command...
system-view
apply qos-profile
profile-name interface
interface-list
interface interface-type
interface-number
apply qos-profile
profile-name
2-3
Remarks
—
—
Optional
By default, the mode to apply
a QoS profile is user-based.
If the 802.1x authentication
mode is
address-based, the mode
to apply a QoS profile must
be configured user-based.
If the 802.1x authentication
mode is port-based, the
mode to apply a QoS
profile must be configured
as port-based.
Remarks
—
Select either of the
operations.
By default, a port has
no QoS profile applied
to it.
Remarks
Available in any view
MAC