3Com WX3000 Series Operation Manual page 424

Figure 1-4 ARP attack detection configuration
GE1/0/1
GE1/0/2
Client A
Configuration procedure
# Enable DHCP snooping on Switch A.
<SwitchA> system-view
[SwitchA] dhcp-snooping
# Specify GigabitEthernet 1/0/1 as the DHCP snooping trusted port and the ARP trusted port.
[SwitchA] interface gigabitethernet 1/0/1
[SwitchA-GigabitEthernet1/0/1] dhcp-snooping trust
[SwitchA-GigabitEthernet1/0/1] arp detection trust
[SwitchA-GigabitEthernet1/0/1] quit
# Enable ARP attack detection on all ports in VLAN 1.
[SwitchA] vlan 1
[SwitchA-vlan1] arp detection enable
DHCP Server
Switch A
DHCP Snooping
GE1/0/3
Client B
1-9