3Com WX3000 Series Operation Manual page 429

Unified switches switching engine
Table of Contents

Advertisement

To do...
Direct
configura
tion
Set a
community
name and
access
Indirect
permission
configura
tion
Set the maximum size of an SNMP
packet for SNMP agent to receive or
send
Set the device engine ID
Create/Update the view information
Configuring basic SNMP functions for SNMPv3
The device now supports the Advanced Encryption Standard (AES) for SNMPv3 to provide encryption.
AES can provide higher security than the Data Encryption Standard (DES).
Follow these steps to configure basic SNMP functions for SNMPv3:
To do...
Enter system view
Enable SNMP agent
Set system information and
specify to enable SNMPv3 on
the device
Use the command...
snmp-agent community
Set a
{ read | write }
community
community-name [ acl
name
acl-number | mib-view
view-name ]*
snmp-agent group { v1 |
Set an
v2c } group-name [ read-view
SNMP
read-view ] [ write-view
group
write-view ] [ notify-view
notify-view ] [ acl acl-number ]
Add a user
snmp-agent usm-user { v1 |
to an
v2c } user-name group-name
SNMP
[ acl acl-number ]
group
snmp-agent packet
max-size byte-count
snmp-agent local-engineid
engineid
snmp-agent mib-view
{ included | excluded }
view-name oid-tree [ mask
mask-value ]
Use the command...
system-view
snmp-agent
snmp-agent sys-info
{ contact sys-contact |
location sys-location | version
{ { v1 | v2c | v3 }* | all } }
1-4
Remarks
Required
You
can
set
SNMPv1/SNMPv2c
community
through
configuration.
Indirect configuration is
compatible
SNMPv3. The added
user is equal to the
community name for
SNMPv1
SNMPv2c.
You can choose either
of them as needed.
Optional
1,500 bytes by default.
Optional
By default, the device
engine ID is "enterprise
number + device
information".
Optional
By default, the view name
is "ViewDefault" and OID is
1.
Remarks
Optional
Disabled by default.
You can enable SNMP agent
by executing this command or
any of the commands used to
configure SNMP agent.
Required
By default, the contact
information for system
maintenance is "3Com
Corporation", the system
location is "Marlborough, MA
01752 USA", and the SNMP
version is None.
an
name
direct
with
and

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wx3024Wx3010Wx3008

Table of Contents