Tftp Configuration: The Device Operating As A Tftp Client - 3Com WX3000 Series Operation Manual

TFTP server configuration

TFTP Configuration: The Device Operating as a TFTP Client

Basic configurations on a TFTP client
By default the device can operate as a TFTP client. In this case you can connect the device to the TFTP
server to perform TFTP-related operations (such as creating/removing a directory) by executing
commands on the device.
Follow these steps to perform basic configurations on a TFTP client:
To do...
Download a file from a TFTP
server
Upload a file to a TFTP server
Enter system view
Set the file transmission mode
Specify an ACL rule used by
the specified TFTP client to
access a TFTP server
Specifying the source interface or source IP address for an FTP client
You can specify the source interface and source IP address for the device operating as a TFTP client,
so that it can connect with a remote TFTP server through the IP address of the specified interface or the
specified IP address.
Follow these steps to specify the source interface and source IP address for a TFTP client:
To do...
Specify the source interface
used for the current connection
Specify the source IP address
used for the current connection
Enter system view
Task
For details, see the corresponding
manual
Use the command...
tftp tftp-server get source-file
[ dest-file ]
tftp tftp-server put source-file
[ dest-file ]
system-view
tftp { ascii | binary }
tftp-server acl acl-number
Use the command...
tftp tftp-server
source-interface
interface-type interface-number
{ get source-file [ dest-file ] | put
source-file-url [ dest-file ] }
tftp tftp-server source-ip
ip-address { get source-file
[ dest-file ] | put source-file-url
[ dest-file ] }
system-view
2-2
Remarks
—
Remarks
Optional
Optional
—
Optional
Binary by default
Optional
Not specified by default
Remarks
Optional
Not specified by default
Optional
Not specified by default
—