Setting To Output System Information To A Log Host - 3Com WX3000 Series Operation Manual

Unified switches switching engine
Table of Contents

Advertisement

Follow these steps to enable the display of system information on a monitor terminal:
To do...
Enable the debugging/log/trap
information terminal display
function
Enable debugging information
terminal display function
Enable log information terminal
display function
Enable trap information
terminal display function
Make sure that the debugging/log/trap information terminal display function is enabled (use the
terminal monitor command) before you enable the corresponding terminal display function by using
the terminal debugging, terminal logging, or terminal trapping command.

Setting to Output System Information to a Log Host

Follow these steps to set to output system information to a log host:
To do...
Enter system view
Enable the information center
Enable system information
output to a log host
Configure the source interface
through which log information is
sent to the log host
Configure the output rules of
system information
Use the command...
terminal monitor
terminal debugging
terminal logging
terminal trapping
Use the command...
system-view
info-center enable
info-center loghost
host-ip-addr [ channel
{ channel-number |
channel-name } | facility
local-number ]*
info-center loghost source
interface-type interface-number
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
1-11
Remarks
Optional
Enabled by default
Optional
Disabled by default
Optional
Enabled by default
Optional
Enabled by default
Remarks
Optional
Enabled by default.
Required
By default, the device does not
output information to the log
host.
After you configure the device
to output information to the log
host, the device uses
information channel 2 by
default.
Optional
By default, no source interface
is configured, and the system
automatically selects an
interface as the source
interface.
Optional
Refer to
Table 1-4
for the
default output rules of system
information.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wx3024Wx3010Wx3008

Table of Contents