File System Configuration Example - 3Com WX3000 Series Operation Manual

Follow these steps to perform configuration on prompt mode of file system:
To do...
Enter system view
Configure the prompt mode of
the file system

File System Configuration Example

# Display all the files in the root directory of the file system.
<device> dir /all
Directory of unit1>flash:/
1 -rw-
2 -rwh
3 (*) -rw-
4 -rwh
5 -rwh
6 -rwh
6858 KB total (6848 KB free)
(*) -with main attribute
(*b) -with both main and backup attribute
# Copy the file flash:/startup.cfg to flash:/test/, with 1.cfg as the name of the new file.
<device> copy flash:/startup.cfg flash:/test/1.cfg
Copy unit1>flash:/startup.cfg to unit1>flash:/test/1.cfg?[Y/N]:y
..
%Copy file unit1>flash:/startup.cfg to unit1>flash:/test/1.cfg...Done.
# Display the file information after the copy operation.
<device>dir /all
Directory of unit1>flash:/
1 -rw-
2 -rwh
3 (*) -rw-
4 -rwh
5 -rwh
6 -rwh
7 drw-
6858 KB total (6848 KB free)
(*) -with main attribute
(*b) -with both main and backup attribute
Use the command...
system-view
file prompt { alert | quiet }
1443 Apr 02 2000 02:45:13
151 Apr 02 2000 00:05:53
1713 Apr 01 2000 23:57:11
356 Apr 02 2000 03:20:25
428 Apr 02 2000 03:21:59
572 Apr 02 2000 03:22:21
(b) -with backup attribute
1443 Apr 02 2000 02:45:13
151 Apr 02 2000 00:05:53
1713 Apr 01 2000 23:57:11
356 Apr 02 2000 03:20:25
428 Apr 02 2000 03:21:59
572 Apr 02 2000 03:22:21
- Apr 02 2000 00:15:8
(b) -with backup attribute
1-4
Remarks
—
Required
By default, the prompt mode of
the file system is alert.
startup.cfg
private-data.txt
vrpcfg.cfg
dsakey
hostkey
serverkey
startup.cfg
private-data.txt
vrpcfg.cfg
dsakey
hostkey
serverkey
test