3Com WX3000 Series Operation Manual page 268

Complete the following tasks configure RADIUS for the device functioning as a RADIUS client:
Creating a RADIUS Scheme
Configuring RADIUS Authentication/Authorization Servers
Configuring RADIUS Accounting Servers
Configuring Shared Keys for RADIUS Messages
Configuring the Maximum Number of RADIUS Request
Transmission Attempts
Configuring the
Configuring the Type of RADIUS Servers to be Supported
RADIUS client
Configuring the Status of RADIUS Servers
Configuring the Attributes of Data to be Sent to RADIUS
Servers
Configuring Timers for RADIUS Servers
Enabling Sending Trap Message when a RADIUS Server
Goes Down
Enabling the User Re-Authentication at Restart Function
Configuring the
Refer to the configuration of the RADIUS Server.
RADIUS server
Complete the following tasks to configure RADIUS for the device functioning as a local RADIUS server:
Creating a RADIUS Scheme
Configuring RADIUS Authentication/Authorization Servers
Configuring RADIUS Accounting Servers
Configuring Shared Keys for RADIUS Messages
Configuring the Maximum Number of RADIUS Request
Transmission Attempts
Configuring the Type of RADIUS Servers to be Supported
Configuring the
RADIUS server
Configuring the Status of RADIUS Servers
Configuring the Attributes of Data to be Sent to RADIUS
Servers
Configuring the network access server and shared key
enabled and allowed on the local RADIUS server
Configuring Timers for RADIUS Servers
Enabling Sending Trap Message when a RADIUS Server
Goes Down
Configuring the
Refer to the configuration of the RADIUS client
RADIUS client
The RADIUS service configuration is performed on a RADIUS scheme basis. In an actual network
environment, you can either use a single RADIUS server or two RADIUS servers (primary and
Task
Task
2-9
Remarks
Required
Required
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
—
Remarks
Required
Required
Required
Optional
Optional
Optional
Optional
Optional
Required
Optional
Optional
—