3Com WX3000 Series Operation Manual page 389

To do...
Collect the statistics on the
packets matching specific ACL
rules
Clear the statistics on the packets
matching specific ACL rules
Follow these steps to collect traffic statistics on packets that are of a port group and match specific ACL
rules:
To do...
Enter system view
Enter port group view
Collect the statistics on the
packets matching specific ACL
rules
Clear the statistics on the packets
matching specific ACL rules
Follow these steps to collect traffic statistics on packets passing a port and matching specific ACL rules:
To do...
Enter system view
Enter Ethernet port view
Collect the statistics on the
packets matching specific
ACL rules
Clear the statistics on the
packets matching specific
ACL rules
As the priority of traffic classification rules is higher than that of the default rules used for processing
protocol packets, collecting traffic statistics on all the packets or packets of a VLAN may affect device
management that is implemented through Telnet and so on
Configuration example
GigabitEthernet 1/0/1 is connected to the 10.1.1.0/24 network segment.
Collect statistics on the packets sourced from the 10.1.1.0/24 network segment.
Clear the statistics.
1) Method I
<device> system-view
Use the command...
traffic-statistic vlan vlan-id
inbound acl-rule
reset traffic-statistic vlan vlan-id
inbound acl-rule
Use the command...
system-view
port-group group-id
traffic-statistic inbound acl-rule
reset traffic-statistic inbound
acl-rule
Use the command...
system-view
interface interface-type
interface-number
traffic-statistic inbound acl-rule
reset traffic-statistic inbound acl-rule
1-28
Remarks
Required
Optional
Remarks
—
—
Required
Optional
Remarks
—
—
Required
Optional