3Com WX3000 Series Operation Manual page 400

# Create the user domain test.net and specify radius1 as your RADIUS server group.
[device] domain test.net
[device-isp-test.net] radius-scheme radius1
[device-isp-test.net] quit
# Create ACL 3000 to permit IP packets destined for any IP address.
[device] acl number 3000
[device-acl-adv-3000] rule 1 permit ip destination any
[device-acl-adv-3000] quit
# Define a QoS profile named "example" to limit the rate of matched packets to 128 kbps and
configuring to drop the packets exceeding the target packet rate.
[device] qos-profile example
[device-qos-profile-example] traffic-limit inbound ip-group 3000 128 exceed drop
# Enable 802.1x.
[device] dot1x
[device] dot1x interface GigabitEthernet1/0/1
After the configuration, the QoS profile named "example" will be applied to the user with user name
"someone" automatically after the user passes the authentication.
2-5