Ftp Configuration: The Device Operating As An Ftp Client - 3Com WX3000 Series Operation Manual

To do...
Configure a shell banner
For details about the header command, refer to the Login part of the manual.
Displaying FTP server information
Display the information about FTP server
configurations on the device
Display the source IP address set for an
FTP server
Display the login FTP client on an FTP
server

FTP Configuration: The Device Operating as an FTP Client

Basic configurations on an FTP client
By default the device can operate as an FTP client In this case you can connect the device to the FTP
server to perform FTP-related operations (such as creating/removing a directory) by executing
commands on the device.
Follow these steps to perform basic configurations on an FTP client:
To do...
Enter FTP client view
Specify to transfer files in ASCII
characters
Specify to transfer files in
binary streams
Set the data transfer mode to
passive
Use the command...
header shell text
To do...
Use the command...
ftp [ cluster | remote-server
[ port-number ] ]
ascii
binary
passive
Use the command...
display ftp-server
display ftp-server source-ip
display ftp-user
1-6
Remarks
Use either command or both.
By default, no banner is
configured.
Remarks
Available in any view
Remarks
—
Use either command
By default, files are transferred
in ASCII characters.
Optional
passive by default.