Examples For Applying Acls To Hardware; Basic Acl Configuration Example; Advanced Acl Configuration Example - 3Com WX3000 Series Operation Manual

Configuration procedure
# Define ACL 2001.
<device> system-view
[device] acl number 2001
[device-acl-basic-2001] rule 1 permit source 10.110.100.46 0
[device-acl-basic-2001] quit
# Reference ACL 2001 to control users logging in to the Web server.
[device] ip http acl 2001

Examples for Applying ACLs to Hardware

Basic ACL Configuration Example

Network requirements
As shown in Figure
address is 10.1.1.1. Apply an ACL on GigabitEthernet 1/0/1 to deny packets with the source IP address
of 10.1.1.1 from 8:00 to 18:00 everyday.
Figure 1-3 Network diagram for basic ACL configuration
PC1
10.1.1.1
PC2
Configuration procedure
# Define a periodic time range that is active from 8:00 to 18:00 everyday.
<device> system-view
[device] time-range test 8:00 to 18:00 daily
# Define ACL 2000 to filter packets with the source IP address of 10.1.1.1.
[device] acl number 2000
[device-acl-basic-2000] rule 1 deny source 10.1.1.1 0 time-range test
[device-acl-basic-2000] quit
# Apply ACL 2000 on GigabitEthernet 1/0/1.
[device] interface GigabitEthernet1/0/1
[device-GigabitEthernet1/0/1] packet-filter inbound ip-group 2000

Advanced ACL Configuration Example

Network requirements
As shown in Figure
IP address of the wage query server is 192.168.1.2. The R&D department is connected to
1-3, PC1 and PC2 connect to Switch through GigabitEthernet 1/0/1. PC1's IP
GEth1/0/1
Switch
1-4, different departments of an enterprise are interconnected through Switch. The
To the router
1-13