Telnet Configurations For Different Authentication Modes - 3Com WX3000 Series Operation Manual

VTY terminal
configuration

Telnet Configurations for Different Authentication Modes

Table 3-3 lists Telnet configurations for different authentication modes.
Table 3-3 Telnet configurations for different authentication modes
Authentication
mode
None
Password
Scheme
Configuration
Make terminal services available
Set the maximum number of
lines the screen can contain
Set history command buffer size
Set the timeout time of a user
interface
Telnet configuration
Perform common
configuration
Configure the
password
Perform common
configuration
Specify to
perform local
authentication or
remote RADIUS
authentication
Configure user
name and
password
Manage VTY
users
Perform common
configuration
Optional
By default, terminal services are available in
all user interfaces
Optional
By default, the screen can contain up to 24
lines.
Optional
By default, the history command buffer can
contain up to 10 commands.
Optional
The default timeout time is 10 minutes.
Perform common
Telnet configuration
Configure the
password for local
authentication
Perform common
Telnet configuration
AAA configuration
specifies whether to
perform local
authentication or
RADIUS authentication
Configure user names
and passwords for
local/RADIUS users
Set service type for
VTY users
Perform common
Telnet configuration
3-2
Description
Description
Optional
Refer to Table 3-2.
Required
Optional
Refer to Table 3-2.
Optional
Local authentication is
performed by default.
Refer to the AAA part for more.
Required
The user name
password of a local user are
configured on the switching
engine.
The user name
password of a remote user
are configured on
RADIUS server. Refer to
user manual of RADIUS
server for more.
Required
Optional
Refer to Table 3-2.
and
and
the