3Com WX3000 Series Operation Manual page 623

To do...
Configure the maximum
number of history records that
can be saved
Configure the automatic test
interval
Configure the probe timeout
time
Configure the type of service
Start the test
Display test results
7) Configuring TCP test on HWPing client
Follow these steps to configure TCP test on HWPing client:
To do...
Enter system view
Enable the HWPing client
function
Create a HWPing test group
and enter its view
Configure the destination
address
Use the command...
history-records number
frequency interval
timeout time
tos value
test-enable
display hwping results
[ admin-name operation-tag ]
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation- tag
destination-ip ip-address
1-12
Remarks
Optional
By default, the maximum
number is 50.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Optional
By default, a probe times out in
three seconds.
Optional
By default, the service type is
zero.
Required
Required
You can execute the command
in any view.
Remarks
—
Required
By default, the HWPing client
function is disabled.
Required
By default, no test group is
configured.
Required
This IP address and the one
configured on the HWPing
server for listening services
must be the same.
By default, no destination
address is configured.