3Com WX3000 Series Operation Manual page 625

To do...
Enter system view
Enable the HWPing client
function
Create a HWPing test group
and enter its view
Configure the destination
address
Configure the destination port
Configure the source IP
address
Configure the source port
Configure the test type
Configure the number of
probes per test
Configure the maximum
number of history records that
can be saved
Configure the data packet size
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation- tag
destination-ip ip-address
destination-port
port-number
source-ip ip-address
source-port port-number
test-type { udpprivate |
udppublic }
count times
history-records number
datasize size
1-14
Remarks
—
Required
By default, the HWPing client
function is disabled.
Required
By default, no test group is
configured.
Required
This IP address and the one
configured on the HWPing
server for listening service must
be the same.
By default, no destination
address is configured.
Required in a Udpprivate
test
A Udppublic test is a UDP
connection test on port 7.
Use the hwping-server
udpecho ip-address
command on the server to
configure the
service port; otherwise the
test will fail. No port number
needs to be configured on
the client; any destination
port number configured on
the client will not take effect.
By default, no destination
port number is configured.
Optional
By default, no source IP
address is configured.
Optional
By default, no source port is
specified.
Required
By default, the test type is
ICMP.
Optional
By default, one probe is made
per test.
Optional
By default, the maximum
number is 50.
Optional
By default, the data packet size
is 100 bytes.
7
listening