Resetting The Oap Software System - 3Com WX3000 Series Operation Manual

Resetting the OAP Software System

If the operating system works abnormally or is under other anomalies, you can reset the OAP software
system.
Follow these steps to reset the OAP software system:
To do...
Reset the OAP software
system
The reset operation may cause data loss and service interruption. Therefore, before resetting the OAP
software system, you need to save the data on the operating system to avoid service interruption and
hardware data loss.
Use the command...
oap reboot slot 0
2-3
Remarks
Required
Available in user view